











When preparing to transfer kitchen equipment, be particularly cautious when packing fragile objects like glass cups. When packaging your glassware, there are a few simple measures you can follow to ensure that everything arrives in one piece. Here are the steps:
1. Prepare the Box
2. Box Up the First Layer
3. Fill the Box
4. Wrapped Stemmed Glass Cups
5. Cushion the Top
6. Check and Seal the Box
If you're using paper, crumple up several sheets to cover the bottom of the box, whether it's packing paper or newsprint. Crumpling the paper will give enough padding to keep the glass cups from striking the bottom of the box and will also protect them if it is dropped.
Make sure you have a thick enough layer on the bottom to shield the contents from bumps if you're using towels or sheets.
Fold over the ends at the bottom of the glass cup to create a lovely tight package now that your glass cups or other glasses are wrapped. At this stage, you shouldn't be able to feel the cup's edges. Depending on whether the glass cups has a handle or a big lip, you may need to wrap an additional layer of paper if you can.
Place the glass (or pair of glasses) on top of crumpled paper or heaped towels in the box.
Continue to wrap your glass cups in single or double packages, stacking them one on top of the other. Make sure that the heavier, bulkier glasses are on the bottom and the lighter glass cups are on the top.
Follow the procedures above for glasses with a fragile stem, such as wine glasses, but be sure to wrap the stem first before wrapping the glass cups. Wrap the stem in half a sheet, then set it on the stack of paper and begin rolling. This guarantees that the glass's most delicate section is well protected. Also, instead of wrapping two stemmed glasses at a time, just one should be wrapped at a time, and these glasses should always be packed last in the box, giving plenty of room for extra padding at the top.
Make sure the box isn't too stuffed and that there's enough room at the top for extra packing materials. Make sure the amount of crumpled paper you put in the bottom of the box matches the amount you put in the top. If you're using towels or other materials, make sure there's enough area on top to add a thick layer.
Shake the box gently back and forth before sealing it. You shouldn't be able to hear or feel much moving of the contents of the glass cups.
When you're satisfied with the packing, tape the box shut and mark it, indicating what's inside and which room it belongs in. Always label the box as "fragile" so that the movers are aware that it must be handled with care.
Shandong Jessli Homeware Co., Ltd., which has over 8 years of expertise in producing and exporting household products, was founded in 2013. Products include candle jars and holders, candle accessories, jar safety matches, diffuser bottles, essential oil bottles, and perfume bottles, and we have advanced manufacturing lines and a tight quality control system. More than ten primary series and over 500 products include glass cups, glass storage jars, pepper grinders, and disposable biodegradable tableware.
With the popularity of electric lights, our demand for the lighting function of candles has become very small, but sometimes we still need to use candles. For example, the light of candles is very warm, we can use candles at banquets. In addition, scented candles are also good for our body and mind. Let me introduce some knowledge about candles so that you can make better use of candles.
Here is the list of the article:
l What should we do if the candle leaves the candle cup?
l How to put out the candle?
l What is the function of the candle cup lid?
The main reason why the candle leaves the candle cup is temperature. Aroma candles are the easiest to take off in winter, so you can soak the candle cup with warm water before filling the candle. After wiping the candle cup, you can also add a layer of heat preservation to the outside of the candle cup, such as tin foil, so that the problem of cup removal can be avoided. However, as the temperature drops, even the filled scented candles may fall off the candle cup, especially candles made of pure soy wax, coconut wax, etc. However, it does not affect the use of the candle but just slightly affects the appearance.
There are two ways to extinguish the candles?
1) When you can't find the lid that matches the candle cup, you can use other larger glassware to cover the cup to make the scented candle go out. The principle of this extinguishing method is to isolate oxygen to prevent the candle from continuing to burn.
2) Use a candle extinguisher or toothpick wire to push the candle wick into the wax liquid to extinguish, and then quickly correct it. After the candle is extinguished, the wick can be trimmed to facilitate the next use. When trimming, you only need to use an ordinary trimmer to trim off the excess black part.
Candle cup lids can be divided into wooden lid, iron lid, aluminum lid, zinc alloy lid. If the candle is stored for a long time, it is easy to sublime into the air, and the candle cup lids can delay the sublimation of the candle. The cover of the candle cup not only protects the candle from being contaminated with sparks to burn, but also helps preserve the quality of the candle. In addition, the candle cup lid can help extinguish the candle. Candles cannot be burned for too long at a time. Properly burning scented candles can help us relax. Excessive burning of candles may be harmful to health. Therefore, it is necessary to extinguish scented candles with candle cup lids in time. In addition, the lid of the candle cup is matched with the candle cup. The complete set of the candle cup is not only beautiful in appearance, but also convenient for storing candles.
Welcome to contact us if you are in need of candle cups.
If your favorite scented candle runs out quickly, throwing away the glass jar just feels wasteful. In this case, you can choose to clear the candle jar and reuse it. Candle jars can be used to make new candles, use them as storage, or display them as decoration. Next, let us understand the wax removal method of candle jars. Here are some answers.
Here is the content list:
Remove candle wax with hot water.
Put in refrigerator to freeze.
Blow with a hairdryer.
This method works best with wide-mouth candles. Put used candles on a protective surface, such as a dish towel or a heat shield. Boil enough water to fill the candle jar, then pour into the container. Candle wax has a fairly low melting point because candles must burn on an open flame. So melting residual wax is a great way to clean up candle jars. The water will melt the candle wax, causing it to float to the surface of the container. Let cool completely before removing wax. Stop the sink drain and filter the water and remaining candle debris. Before loosening the drain plug, make sure all wax residue is removed from the sink, as wax can clog the drain.
A surefire way to remove candle wax is freezing, which shrinks the wax. Start by placing the used candle jar in the refrigerator overnight. The next day, take the candle jar out of the refrigerator and turn it upside down, and the wax block should pop right away. If not, you can use a spoon or butter knife to press down on one corner of the wax to lift and remove.
Hairdryers are often used to remove candle wax from carpets. They can also be used to soften the wax in used candles for easier removal. Start by holding the candle with an oven mitt. Turn on the warm air blower and use it to heat the wax from the sides and bottom of the candle. Once the wax is soft to the touch, lift or scrape it out of the candle jar with a butter knife.
Our official website is https://www.sdjesslihouse.com/. If you are interested in our candle jar products, want more product information, or have any other questions, please contact us. Our manufacturing processes include Ion Plating, Laser Engraving, Electroplating, Screen Printing, Color Spraying, Hot Stamping, UV Printing. We have a professional process team to provide professional technical support for customers' designs. Our design team can provide customers with creative designs with innovative inspiration. Our strong R&D team can turn customers' designs or ideas into manufacturable products. All our products are processed in a dust-free workshop to ensure product quality and product surface cleanliness. We accept OEM/ODM customization, such as logo, color, packaging, cover, size, surface finish, etc. Our products have passed the certifications of SGS, CA pro 65, BV, etc. We promise that all the products that leave the factory are safe, please choose us and our products with confidence.
The glass candle jar was originally a candle holder and has evolved into a decorative piece. Let's take a look at the development of the glass candle jar and how it has changed. Here are some answers.
Here is the content list:
l The glass candle jar is constantly improving and changing.
l The development of the glass candle jar style.
Looking at the evolution of the ancient glass candle jar, it is easy to see that it has undergone a succession of changes, from simplicity to sophistication, and a tendency towards a greater depth of function and aesthetic sophistication. Western Jin, a dynasty briefly unified after the division of the Three Kingdoms, is known for its high-temperature firing of celadon in imitation of bronze. The rapid development of the porcelain industry also led to a change in the material of the glass candle jar, with the traditional pottery, iron, and bronze jars gradually declining in popularity and being replaced by porcelain jars. At the same time, the fusion of ethnic groups and the continued introduction of Buddhism also subtly enriched the aesthetic connotations of the Western Jin celadon jar.
The most popular modern-day product is the glass candle jar, followed by the iron candle jar, which has been used extensively in modern times and remains in high demand. Through the use of specific treatments, we can make the most of the properties of glass and compensate for its disadvantages, without being constrained by its natural properties. Laminated glass, for example, not only insulates and keeps heat in but also prevents splinters from injuring people, making it safe and reliable.
Before the 19th century, lamps made from "fire" as a light source, animal and vegetable oils, and candles were called ancient lamps. In terms of the development of lamps, ancient Chinese lamps include oil lamps of various materials, glass candle jars, and colored lamps. The glass candle jar has three basic styles in terms of the way it holds the candle: a hollow tube, a cavity, and a brazier. The first two styles are found in the Jin, Tang, and Song dynasties, the latter being more common in the Ming and Qing dynasties.
The glass candle jar has a long history. During the Three Kingdoms period, there were celadon candlesticks in the shape of a reclining sheep, and in the Western Jin dynasty the reclining lion-shaped candle was popular; during the Southern dynasty, the glass candle jar was richer in style, with lion-shaped, single-tube, double-tube, four-tube and lotus-shaped candles. The tubular glass candle jar was popular in the Fujian region, with a long stringed handle and an open bowl shape at the top of the handle, with a candle holder in the bowl. Glass candle jar bases from the Sui and Tang dynasties are often beautifully carved with floral motifs. The Ming dynasty glass candle jar is rich in form and has a high artistic value. Modern glass candle jars are available in a myriad of styles.
Our company philosophy is "integrity, hard work, quality and responsibility", which means quality first, customer first, first-class service, integrity-based, smile to meet the challenge, and sincere service to every customer! For more questions about glass candle jar, please feel free to contact us. With years of accumulated experience in R&D and production, we can provide you with more product services and technical support! Our official website is https://www.sdjesslihouse.com/.